Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Down-Conversion Polymer Composite Coatings with Multipeak Absorption and Emission

View through CrossRef
Spectral adjustment is an effective method to increase light conversion efficiency of solar cells and to promote the growth of plants. Down-converter (DC) materials are considered to be one of the most effective methods of spectral modification. The focus of this work was to expand the spectral response range of down-conversion layers to achieve multipeak absorption and emission. Sr2CaMoO6:Sm,Na and YVO4:Bi,Eu, which have different excitation peaks in the UV-blue region and varied emission peaks in visible light regions, were prepared in this work. Sr2CaMoO6:Sm,Na can effectively produce red light at 648 nm upon excitation at 408 nm, while YVO4:Bi,Eu can produce red light at 618 nm upon excitation at 365 nm. Polymeric luminescent coatings with one single kind of phosphor were prepared separately before the two phosphors were mixed together in uniform polymer coatings. The two phosphors were also assembled in bilayer coatings with different concentrations. The results showed that high transmittances over 90% were achieved for the two composite coatings with the thickness of 20 and 30 μm. The increase in particle loadings from 1‰ to 4‰ slightly decreased coating transmittance but increased luminescence intensity. The increase in the ratio of Sr2CaMoO6:Sm,Na and YVO4:Bi,Eu from 5/1 to 10/1 resulted in high transmittance of the DC coatings, independent of total filler loadings (3‰ and 4‰) and coating thickness. The relative intensities of emission peaks can be adjusted conveniently by changing filler ratios. In addition, the transmittance and luminescent intensities of the coatings where the two phosphors were assembled in two layers were close to the uniform coatings, suggesting the negligible effect of UV light irradiation order. This work proved that the prepared coatings presented multipeak absorption and emission upon UV light excitation. These coatings can be expected to be applied in fields such as solar cells and agriculture greenhouses.
Title: Down-Conversion Polymer Composite Coatings with Multipeak Absorption and Emission
Description:
Spectral adjustment is an effective method to increase light conversion efficiency of solar cells and to promote the growth of plants.
Down-converter (DC) materials are considered to be one of the most effective methods of spectral modification.
The focus of this work was to expand the spectral response range of down-conversion layers to achieve multipeak absorption and emission.
Sr2CaMoO6:Sm,Na and YVO4:Bi,Eu, which have different excitation peaks in the UV-blue region and varied emission peaks in visible light regions, were prepared in this work.
Sr2CaMoO6:Sm,Na can effectively produce red light at 648 nm upon excitation at 408 nm, while YVO4:Bi,Eu can produce red light at 618 nm upon excitation at 365 nm.
Polymeric luminescent coatings with one single kind of phosphor were prepared separately before the two phosphors were mixed together in uniform polymer coatings.
The two phosphors were also assembled in bilayer coatings with different concentrations.
The results showed that high transmittances over 90% were achieved for the two composite coatings with the thickness of 20 and 30 μm.
The increase in particle loadings from 1‰ to 4‰ slightly decreased coating transmittance but increased luminescence intensity.
The increase in the ratio of Sr2CaMoO6:Sm,Na and YVO4:Bi,Eu from 5/1 to 10/1 resulted in high transmittance of the DC coatings, independent of total filler loadings (3‰ and 4‰) and coating thickness.
The relative intensities of emission peaks can be adjusted conveniently by changing filler ratios.
In addition, the transmittance and luminescent intensities of the coatings where the two phosphors were assembled in two layers were close to the uniform coatings, suggesting the negligible effect of UV light irradiation order.
This work proved that the prepared coatings presented multipeak absorption and emission upon UV light excitation.
These coatings can be expected to be applied in fields such as solar cells and agriculture greenhouses.

Related Results

Microstructural characteristics of Ce conversion coatings on Cf/Al composite or NiP plated Cf/Al composite
Microstructural characteristics of Ce conversion coatings on Cf/Al composite or NiP plated Cf/Al composite
Abstract The microstructural characteristics of Ce conversion coatings on carbon fiber reinforced Al matrix (Cf/Al) composites and Ce convers...
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
The calculation of the corrosion current of the steel – plating allowed us to estimate the protective properties and the porosity of the Tin-Nickel coatings. Measured in 3% NaCl so...
A Review on Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
A Review on Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Nickel electrodeposition is a widely utilized method for creating thin films on various substrates with various desirable attributes. Recently, there has been a growing interest in...
Barrier Polymers
Barrier Polymers
AbstractBarrier polymers are used for many packaging and protective applications. As barriers they separate a system, such as an article of food or an electronic component, from an...
Barrier Polymers
Barrier Polymers
AbstractBarrier polymers are used for many packaging and protective applications. As barriers they separate a system, such as an article of food or an electronic component, from an...
Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Nickel electrodeposition is a widely utilized method for creating thin films on various substrates with various desirable attributes. Recently, there has been a growing interest in...
Polymer-laden homogeneous shear-driven turbulent flow: a model for polymer drag reduction
Polymer-laden homogeneous shear-driven turbulent flow: a model for polymer drag reduction
Drag reduction (DR) under a turbulent boundary layer implies the suppression of turbulent momentum flux to the wall, a large-eddy phenomenon. Our hypothesis is that the essential m...
Interfacial Adhesion in Fibre-Polymer Composites
Interfacial Adhesion in Fibre-Polymer Composites
<p>The mechanical performance of a fibre-polymer composite is largely determined by the strength of interfacial adhesion across the fibre-polymer phase boundary. Therefore, a...

Back to Top