Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Epitaxial Nd3+:YAG/YAG waveguide laser

View through CrossRef
Solid state lasers with a planar Nd,Lu,Ga:YAG/YAG waveguide structure have been created using liquid phase epitaxy. The method used to produce such epitaxial structures ensures obtaining Nd3+ ions concentration in the range from 1 at.% to 3 at.% in waveguiding thin films. Spectroscopic characterization of active films was performed. The Nd,Lu,Ga:YAG waveguide for each neodymium ions concentration exhibited lasing operation at room temperature at a wavelength of 1064 nm with impulse laser diodes pumping at 808 nm and 885 nm. The maximum average output power Pav = 2.6 mW and 72.2% slope efficiency was obtained for 1 at.% Nd3+ waveguide pumped at 885 nm.
Title: Epitaxial Nd3+:YAG/YAG waveguide laser
Description:
Solid state lasers with a planar Nd,Lu,Ga:YAG/YAG waveguide structure have been created using liquid phase epitaxy.
The method used to produce such epitaxial structures ensures obtaining Nd3+ ions concentration in the range from 1 at.
% to 3 at.
% in waveguiding thin films.
Spectroscopic characterization of active films was performed.
The Nd,Lu,Ga:YAG waveguide for each neodymium ions concentration exhibited lasing operation at room temperature at a wavelength of 1064 nm with impulse laser diodes pumping at 808 nm and 885 nm.
The maximum average output power Pav = 2.
6 mW and 72.
2% slope efficiency was obtained for 1 at.
% Nd3+ waveguide pumped at 885 nm.

Related Results

Исследование генерационных характеристик лазера на композитном активном элементе из Nd3+:YAG / Cr4+:YAG керамики и его применение
Исследование генерационных характеристик лазера на композитном активном элементе из Nd3+:YAG / Cr4+:YAG керамики и его применение
В настоящей работе представлены результаты исследований генерации лазера на композитном элементе из Nd3+:YAG/Cr4+:YAG керамики отечественного производства. Композитный элемент, пол...
Comparison of Nd: YAG Laser Iridotomy Alone Versus Sequential Argon-Nd: YAG Laser Iridotomy in Patients with Primary Angle Closure Spectrum
Comparison of Nd: YAG Laser Iridotomy Alone Versus Sequential Argon-Nd: YAG Laser Iridotomy in Patients with Primary Angle Closure Spectrum
Purpose:  To compare the mean Nd: YAG energy used and mean decrease in IOP 3-hours post-laser, in Nd: YAG Laser iridotomyalone versus sequential Argon-Nd:YAGiridotomy in patients w...
Site-selective excitation and polarized absorption spectra of Nd3+ in Sr5(PO4)3F and Ca5(PO4)3F
Site-selective excitation and polarized absorption spectra of Nd3+ in Sr5(PO4)3F and Ca5(PO4)3F
Polarized absorption and fluorescence spectra were analyzed to establish individual energy (Stark) levels of Nd3+ ions in host crystals of Sr5(PO4)3F (SFAP) and Ca5(PO4)3F (FAP). S...
Yag Laser Versus Sequential Yag-Argon for Peripheral Iridotomy in Acute Angle Closer Glaucoma
Yag Laser Versus Sequential Yag-Argon for Peripheral Iridotomy in Acute Angle Closer Glaucoma
Acute angle closer glaucoma accounts for 10% to 20% of all glaucoma cases. Laser peripheral iridotomy is considered the standard treatment modality for predisposed subjects it can ...
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
<p>Carbon fiber-reinforced plastics (CFRPs) have gained widespread popularity as a lightweight, high-strength alternative to traditional materials. The unique anisotropic pro...
Effect of Nd3+ Ion Concentration on the Corrosion Resistance of API X70 Steel in Chloride‐Rich Environments
Effect of Nd3+ Ion Concentration on the Corrosion Resistance of API X70 Steel in Chloride‐Rich Environments
In this study, the effect of the addition of Nd3+ ions as a corrosion inhibitor of the API X70 steel in a medium rich in chlorides was evaluated. The performance of the Nd3+ ions w...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...

Back to Top