On Natural Gas Combustion Split into Diesel Like Architecture of a Compression Ignition Engine Retrofitted for Spark Ignition Operation

<div class="section abstract"><div class="htmlview paragraph">In commercial areas that no longer favor diesel engines, such as Europe, it might be interesting to convert an existing compression ignition engine to the spark ignition operation and to use natural gas (NG) because of its advantages: availability of still abundant supplies worldwide and environmental benefits compared to conventional liquid fossil fuels.</div><div class="htmlview paragraph">This paper first presents experimental results on NG combustion inside such a converted engine with diesel-like architecture dedicated to light-duty vehicles and passenger cars. Particularly, our study carried out at the engine test bed revealed that in certain operating points (low speed and load, stoichiometric mixture and rather high spark advance), the combustion is split into two distinct events (first, a fast combustion inside the cylinder and piston bowl and then, a slower combustion occurring outside the bowl-in combustion chamber, in other words, in the squish region), which is not specific to the standard spark ignition engine. This is clearly illustrated by a rate of heat release profile with two peaks.</div><div class="htmlview paragraph">The explanations for such combustion event are also supported by a 3D CFD study showing the in-cylinder NG distribution. The combination of experimental and numerical investigations contributes to the understanding of NG combustion in the diesel like architecture of the converted CI engine when subjected to deliberately extreme conditions, namely non-optimal spark advance setting exceeding the maximum brake torque spark advance.</div></div>