Javascript must be enabled to continue!
Carbonation resistance of GGBS concrete
View through CrossRef
This study presents an analysis of a 30 000 strong data matrix derived from 227 studies originating from 35 countries since 1968. Similar to the fly ash effect, the carbonation of concrete increases with the incorporation of ground granulated blast-furnace slag (GGBS), but the rate increases as GGBS content is increased. This effect is greater for concrete designed on an equal water/cement (w/c) basis to the corresponding Portland cement (PC) concrete than on an equal strength basis. The Eurocode 2 specification for XC3 carbonation exposure in terms of the characteristic cube strength of concrete (or its w/c ratio) may need to be increased (or decreased) with the addition of GGBS. Other influencing factors, including GGBS fineness, total cement content and curing, were also investigated. In some cases, the carbonation of in-service GGBS concrete has been estimated to exceed the specified cover before 50 years of service life. Measures to minimise the carbonation of GGBS concrete are proposed. Fully carbonated reinforced GGBS concrete is assessed to show a higher corrosion rate. In relation to PC concrete, the carbonation of GGBS concrete is essentially similar when exposed to 3–5% carbon dioxide accelerated or indoor natural exposure, and the conversion factor of 1 week accelerated carbonation equal to 0·6 year is established.
Title: Carbonation resistance of GGBS concrete
Description:
This study presents an analysis of a 30 000 strong data matrix derived from 227 studies originating from 35 countries since 1968.
Similar to the fly ash effect, the carbonation of concrete increases with the incorporation of ground granulated blast-furnace slag (GGBS), but the rate increases as GGBS content is increased.
This effect is greater for concrete designed on an equal water/cement (w/c) basis to the corresponding Portland cement (PC) concrete than on an equal strength basis.
The Eurocode 2 specification for XC3 carbonation exposure in terms of the characteristic cube strength of concrete (or its w/c ratio) may need to be increased (or decreased) with the addition of GGBS.
Other influencing factors, including GGBS fineness, total cement content and curing, were also investigated.
In some cases, the carbonation of in-service GGBS concrete has been estimated to exceed the specified cover before 50 years of service life.
Measures to minimise the carbonation of GGBS concrete are proposed.
Fully carbonated reinforced GGBS concrete is assessed to show a higher corrosion rate.
In relation to PC concrete, the carbonation of GGBS concrete is essentially similar when exposed to 3–5% carbon dioxide accelerated or indoor natural exposure, and the conversion factor of 1 week accelerated carbonation equal to 0·6 year is established.
Related Results
A Comprehensive Review on the Ground Granulated Blast Furnace Slag (GGBS) in Concrete Production
A Comprehensive Review on the Ground Granulated Blast Furnace Slag (GGBS) in Concrete Production
In the last few decades, the concrete industry has been massively expanded with the adoption of various kinds of binding materials. As a substitute to cement and in an effort to re...
Geotechnical Enhancement and Carbon Sequestration in Expansive Soils using Ground Granulated Blast Slag
Geotechnical Enhancement and Carbon Sequestration in Expansive Soils using Ground Granulated Blast Slag
Expansive soils, characterised by high plasticity and susceptibility to moisture-induced volume changes, pose major challenges to infrastructure performance. This study investigate...
Mechanical Performance and Carbonation Behaviour of GGBS-Biochar Concrete: A Life Cycle Assessment
Mechanical Performance and Carbonation Behaviour of GGBS-Biochar Concrete: A Life Cycle Assessment
The incorporation of supplementary cementitious materials (SCMs) and carbon-rich additives has emerged as an effective approach to improve the performance and durability of concret...
Machine learning of the mineralogical and chemical constituents’ influences on carbonation efficiency
Machine learning of the mineralogical and chemical constituents’ influences on carbonation efficiency
Abstract
Cheap and efficient computational tool is needed to understand the influences of rock’s mineralogical and chemical constituents on the mineral carbonation efficien...
Durability of alumina silicate concrete based on slag/fly ash blends against corrosion
Durability of alumina silicate concrete based on slag/fly ash blends against corrosion
Purpose
The durability of concrete structures, especially built-in corrosive environments, starts to deteriorate after 20–30 years, even though they have been designed for more tha...
Thermal Performance and Electrical Sensitivity of Foamed Concrete Incorporating Ground Granulated Blast-Furnace Slag (GGBS)
Thermal Performance and Electrical Sensitivity of Foamed Concrete Incorporating Ground Granulated Blast-Furnace Slag (GGBS)
The steady stream of technological advancements in the realm of construction materials has engendered an increased emphasis on the investigation of foamed concrete produced with ag...
Development of GGBS Waste-Based Modified Self-Healing Concrete Incorporated with Bentonite
Development of GGBS Waste-Based Modified Self-Healing Concrete Incorporated with Bentonite
Purpose: This research focused on the development of self-healing concrete using GGBS (Ground Granulated Blast Furnace Slag) and Bentonite as partial replacements for cement.
Desi...
Carbonation resistance of fly ash concrete
Carbonation resistance of fly ash concrete
Based on systematic analysis, evaluation and synthesis of a 30 000 strong data matrix generated from 213 studies from 33 countries published since 1968, this paper details the exte...

