Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Electrooxidation for the removal of Sulfamethoxazole using graphite electrodes

View through CrossRef
Sulfamethoxazole is a sulfonamide class antibiotic commonly used to cure infections caused by bacteria in humans and animals. Sulfamethoxazole is considered a contaminant of emerging concern and is one of the most frequently found antibiotics in the environment. It has proven to be highly stable and persistent in the environmental matrices, with a half-life of more than 100 days in an aqueous environment under specific environmental conditions. This causes a severe threat to human and environmental health. The presence of residue of sulfamethoxazole in water matrices shows hazardous effects on aquatic life, affecting the physiological behaviour and reproductive capacity of aquatic organisms. Sulfamethoxazole also showed potential negative impacts on the microbial communities. The persistence of these compounds for an extended period in the environment leads to the formation of antibiotic-resistant genes in bacteria, which can affect the proper functioning of the ecosystem. In this current study, the effectiveness of the electrooxidation process on the removal of sulfamethoxazole using graphite electrodes was investigated. The effect of different parameters like the electrolysis time, current density, initial concentration of sulfamethoxazole, electrolyte concentration (NaCl or Na2SO4), and initial pH of the sample solution were evaluated. Out of the various parameters, it was found that current density (1-10 mA/cm2), electrolyte concentration (100- 500 mg/ L), and the electrolysis time (0-1h) are the key parameters that determine the efficiency of the electrooxidation treatment process. It was found that for the current density value of 10 mA/ cm2, within 45 min of electrolysis time, nearly 99% of the sulfamethoxazole degradation occurred. The possible sulfamethoxazole degradation mechanisms and resulting by-products were analyzed using the Liquid chromatography-mass spectroscopy (LC-MS). Degradation kinetics were also evaluated for the electrooxidation treatment process. The results from the current study showed that electrooxidation could be a favourable treatment technique for the removal of sulfamethoxazole from water matrices.
Title: Electrooxidation for the removal of Sulfamethoxazole using graphite electrodes
Description:
Sulfamethoxazole is a sulfonamide class antibiotic commonly used to cure infections caused by bacteria in humans and animals.
Sulfamethoxazole is considered a contaminant of emerging concern and is one of the most frequently found antibiotics in the environment.
It has proven to be highly stable and persistent in the environmental matrices, with a half-life of more than 100 days in an aqueous environment under specific environmental conditions.
This causes a severe threat to human and environmental health.
The presence of residue of sulfamethoxazole in water matrices shows hazardous effects on aquatic life, affecting the physiological behaviour and reproductive capacity of aquatic organisms.
Sulfamethoxazole also showed potential negative impacts on the microbial communities.
The persistence of these compounds for an extended period in the environment leads to the formation of antibiotic-resistant genes in bacteria, which can affect the proper functioning of the ecosystem.
In this current study, the effectiveness of the electrooxidation process on the removal of sulfamethoxazole using graphite electrodes was investigated.
The effect of different parameters like the electrolysis time, current density, initial concentration of sulfamethoxazole, electrolyte concentration (NaCl or Na2SO4), and initial pH of the sample solution were evaluated.
Out of the various parameters, it was found that current density (1-10 mA/cm2), electrolyte concentration (100- 500 mg/ L), and the electrolysis time (0-1h) are the key parameters that determine the efficiency of the electrooxidation treatment process.
It was found that for the current density value of 10 mA/ cm2, within 45 min of electrolysis time, nearly 99% of the sulfamethoxazole degradation occurred.
The possible sulfamethoxazole degradation mechanisms and resulting by-products were analyzed using the Liquid chromatography-mass spectroscopy (LC-MS).
Degradation kinetics were also evaluated for the electrooxidation treatment process.
The results from the current study showed that electrooxidation could be a favourable treatment technique for the removal of sulfamethoxazole from water matrices.

Related Results

Hydatid Disease of The Brain Parenchyma: A Systematic Review
Hydatid Disease of The Brain Parenchyma: A Systematic Review
Abstarct Introduction Isolated brain hydatid disease (BHD) is an extremely rare form of echinococcosis. A prompt and timely diagnosis is a crucial step in disease management. This ...
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Commercial wet Silver and Silver Chloride electrodes are used to monitor electrocardiogram (ECG) signals in numerous bioimpedance applications. These electrodes are frequently sing...
Boosting Oxygen Electrode Performance via a Redox-Treatment
Boosting Oxygen Electrode Performance via a Redox-Treatment
Introduction The transition to a sustainable energy system complying with climate policy targets is a huge societal challenge. “Hard to electri...
Distribution Characteristics and Metallogenic Regularity of Graphite Deposits in Qinling Orogen, China
Distribution Characteristics and Metallogenic Regularity of Graphite Deposits in Qinling Orogen, China
AbstractQinling orogen is one of the five main repository distribution provinces of large scale graphite resources. Graphite occurrence strata are multitudinous including NeoArchae...
Effects of binder and solvent on cathode manufacturing for Li-ion batteries
Effects of binder and solvent on cathode manufacturing for Li-ion batteries
Lithium-ion batteries (LIBs) have played a significant role in consumer electronics and electric vehicles. The major focus of research in Li-ion batteries has been to maximize perf...
Wastewater electrooxidation using stainless steel electrodes
Wastewater electrooxidation using stainless steel electrodes
Wastewater contains essential nutrients for crops, and after proper treatment its reuse is beneficial to farmers in arid and semi-arid areas. Electrooxidation is an environmentally...
Exploring different carbon allotrope thermoplastic composites for electrochemical sensing
Exploring different carbon allotrope thermoplastic composites for electrochemical sensing
Composite electrodes provide an effective and cheap way to utilise a wide range of carbon materials to make electrodes. More recently thermoplastics have been widely used as the bi...
Recent Observations in Surface Electromyography Recording of Triceps Brachii Muscle in Patients and Athletes
Recent Observations in Surface Electromyography Recording of Triceps Brachii Muscle in Patients and Athletes
Objective: To observe and analyse the literature on the use of surface electromyography electrodes, including the shape, size, and metal composition of the electrodes used, the int...

Back to Top