Different rotational alignment of tibial component should be selected for varied tibial tubercle locations in total knee arthroplasty

AbstractPurposeThe main purpose of this study was to identify how the accuracy of the tibial rotation reference axes varied in populations with different tibial tubercle locations. We hypothesized that the accuracy of the axes of tibial rotation would be affected by the changes of tibial tubercle locations.MethodsSurgical epicondylar axis (SEA), medial third of the patellar tendon (1/3MPT), medial third of the tibial tuberosity (1/3MTT), medial border of the tibial tuberosity (MTT) and Akagi line were drawn. The angle between SEA and horizontal line with the angle between the four tibial rotation axes and the horizontal line was compared by T test. Then, the correlation between TTTG with the angles between the four axes and SEA vertical lines was analyzed. The TTTG was divided into three subgroups (TTTG < 10 mm, 10 mm ≤ TTTG < 15 mm, TTTG ≥ 15 mm), then t test was performed for the angles between the vertical lines of the SEA and the four rotation axes of the tibia in each group.ResultsAmong the four tibial rotation axes, only the difference between MTT and the line perpendicular to SEA had no statistical significance (NS.). The four tibial rotational axes were all positively correlated with TTTG (p < 0.001). When TTTG ≥ 15 mm, Akagi line was 2.5° ± 6.9°internally rotated to the line perpendicular to SEA, while the 1/3MPT and MTT was 0.9° ± 5.3°and 1.3° ± 5.9°externally rotated to the line perpendicular to the SEA when TTTG < 10 mm and 10 mm ≤ TTTG < 15 mm, respectively.ConclusionsMTT showed the best consistency with SEA. TT‐TG had a significant positive correlation with all four tibial rotational axes. In patients with TTTG < 10 mm, 10 mm ≤ TTTG < 15 mm and TTTG ≥ 15 mm, the 1/3MPT, MTT and Akagi line demonstrated good alignment consistency with SEA, respectively.