Permeation characteristics of poly(vinyl alcohol)–poly(vinyl acetate) composite porous membranes

AbstractPoly(vinyl alcohol) (PVAc) composite porous membrane has been prepared from PVAc latex film by extraction with acetone. The PVAc latex was prepared by emulsion polymerization of vinyl acetate in the presence of PVA, employing the hydrogen peroxide–tartaric acid systemm as an initiator. The extraction degree of PVAc could be controlled in a wide range by changing the addition method of the initiator, and, acoordingly, PVA–PVAc omposite porous membranes which had variosu void volumes were obtained. The maximum void volume attained was ca. 90%. Permation characteristics of organic solvents wre investigated on the membranes whose extraction degrees were 95.6% and 80.7%. Thge feeds were benzene, n‐hexane, cyclohexane, and their mixtures. neither swelling nor shrinkage in tje appearance size of the while benzene hardly permeated even at 20 kg/cm2. The grafted PVAc in the mebrane was removed or converted into grafted PVA by treatment with sodium methylate, and then the depression of benzene permeation was lost. The grafted PVAc was suggested to be localizd on the cell wall and was found to function as a valve which closes with nenzene or a good solvent for PVAc and opens with n‐haxane or a poor solvent for PVAc.