Javascript must be enabled to continue!
Electroconductive PEDOT Nanoparticle Integrated Scaffolds for Spinal Cord Tissue Repair
View through CrossRef
Abstract
Background
Hostile environment around the lesion site following spinal cord injury (SCI) prevents the re-establishment of neuronal tracks, thus significantly limiting the regenerative capability. Electroconductive scaffolds are emerging as a promising option for SCI repair, though currently available conductive polymers such as polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) present poor biofunctionality and biocompatibility, thus limiting their effective use in SCI tissue engineering (TE) treatment strategies.
Methods
PEDOT NPs were synthesized via chemical oxidation polymerization in miniemulsion. The conductive PEDOT NPs were incorporated with gelatin and hyaluronic acid (HA) to create gel:HA:PEDOT-NPs. Morphological analysis of both PEDOT NPs and scaffolds was conducted via SEM. Further characterisation included dielectric constant and permittivity variances mapped against morphological changes after crosslinking, Young’s modulus, FTIR, DLS, swelling studies, rheology, in-vitro, and in-vivo biocompatibility studies were also conducted.
Results
Incorporation of PEDOT NPs increased the conductivity to 8.3×10− 4±8.1×10− 5 S/cm. The compressive modulus of the scaffold was tailored to match the native spinal cord at 1.2 ± 0.2 MPa, along with controlled porosity. Rheological studies of the hydrogel showed excellent 3D shear-thinning printing capabilities and shape fidelity post-printing. In-vitro studies showed the scaffolds are cytocompatible and an in-vivo assessment in a rat SCI lesion model shows glial fibrillary acidic protein (GFAP) upregulation not directly in contact with the lesion/implantation site, with diminished astrocyte reactivity. Decreased levels of macrophage and microglia reactivity at the implant site is also observed. This positively influences the re-establishment of signals and initiation of healing mechanisms. Observation of axon migration towards the scaffold can be attributed to immunomodulatory properties of HA in the scaffold caused by a controlled inflammatory response. HA limits astrocyte activation through its CD44 receptors and therefore limits scar formation. This allows for a superior axonal migration and growth towards the targeted implantation site through the provision of a stimulating microenvironment for regeneration.
Conclusions
Based on these results, the incorporation of PEDOT NPs into Gel:HA biomaterial scaffolds enhances not only the conductive capabilities of the material, but also the provision of a healing environment around lesions in SCI. Hence, gel:HA:PEDOT-NPs scaffolds are a promising TE option for stimulating regeneration for SCI.
Springer Science and Business Media LLC
Title: Electroconductive PEDOT Nanoparticle Integrated Scaffolds for Spinal Cord Tissue Repair
Description:
Abstract
Background
Hostile environment around the lesion site following spinal cord injury (SCI) prevents the re-establishment of neuronal tracks, thus significantly limiting the regenerative capability.
Electroconductive scaffolds are emerging as a promising option for SCI repair, though currently available conductive polymers such as polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) present poor biofunctionality and biocompatibility, thus limiting their effective use in SCI tissue engineering (TE) treatment strategies.
Methods
PEDOT NPs were synthesized via chemical oxidation polymerization in miniemulsion.
The conductive PEDOT NPs were incorporated with gelatin and hyaluronic acid (HA) to create gel:HA:PEDOT-NPs.
Morphological analysis of both PEDOT NPs and scaffolds was conducted via SEM.
Further characterisation included dielectric constant and permittivity variances mapped against morphological changes after crosslinking, Young’s modulus, FTIR, DLS, swelling studies, rheology, in-vitro, and in-vivo biocompatibility studies were also conducted.
Results
Incorporation of PEDOT NPs increased the conductivity to 8.
3×10− 4±8.
1×10− 5 S/cm.
The compressive modulus of the scaffold was tailored to match the native spinal cord at 1.
2 ± 0.
2 MPa, along with controlled porosity.
Rheological studies of the hydrogel showed excellent 3D shear-thinning printing capabilities and shape fidelity post-printing.
In-vitro studies showed the scaffolds are cytocompatible and an in-vivo assessment in a rat SCI lesion model shows glial fibrillary acidic protein (GFAP) upregulation not directly in contact with the lesion/implantation site, with diminished astrocyte reactivity.
Decreased levels of macrophage and microglia reactivity at the implant site is also observed.
This positively influences the re-establishment of signals and initiation of healing mechanisms.
Observation of axon migration towards the scaffold can be attributed to immunomodulatory properties of HA in the scaffold caused by a controlled inflammatory response.
HA limits astrocyte activation through its CD44 receptors and therefore limits scar formation.
This allows for a superior axonal migration and growth towards the targeted implantation site through the provision of a stimulating microenvironment for regeneration.
Conclusions
Based on these results, the incorporation of PEDOT NPs into Gel:HA biomaterial scaffolds enhances not only the conductive capabilities of the material, but also the provision of a healing environment around lesions in SCI.
Hence, gel:HA:PEDOT-NPs scaffolds are a promising TE option for stimulating regeneration for SCI.
Related Results
Spinal Cord Injury Rehabilitation: Basics and Beyond
Spinal Cord Injury Rehabilitation: Basics and Beyond
This special issue is dedicated to the Borneo International Spinal Cord Injury (SCI) Rehabilitation Conference (BISCIR) which was held on 30th July – 1st August 2021 through a virt...
Spinal Cord Injury Rehabilitation: Basics and Beyond
Spinal Cord Injury Rehabilitation: Basics and Beyond
This special issue is dedicated to the Borneo International Spinal Cord Injury (SCI) Rehabilitation Conference (BISCIR) which was held on 30th July – 1st August 2021 through a virt...
GABAergic Signaling during Spinal Cord Stimulation Reduces Cardiac Arrhythmias in a Porcine Model
GABAergic Signaling during Spinal Cord Stimulation Reduces Cardiac Arrhythmias in a Porcine Model
Background
Neuraxial modulation, including spinal cord stimulation, reduces cardiac sympathoexcitation and ventricular arrhythmogenesis. There is an incomplete understa...
Synthesis and Investigation into Apatite-forming Ability of Hydroxyapatite/Chitosan-based Scaffold
Synthesis and Investigation into Apatite-forming Ability of Hydroxyapatite/Chitosan-based Scaffold
In this study, porous scaffolds were fabricated using inorganic material-hydroxyapatite and chitosan for bone-tissue engineering. The combination of hydroxyapatite and chitosan may...
Supercapacitive MnO2/PEDOT: PSS Modified 3D-Printed Polymeric Micro-Pillar Electrode for Extraction of Photosynthetic Electrons
Supercapacitive MnO2/PEDOT: PSS Modified 3D-Printed Polymeric Micro-Pillar Electrode for Extraction of Photosynthetic Electrons
Photosynthetic bio-electrochemical cells (PBECs) have been reported as having promising potential for the renewable energy field. When photosynthesis occurs, photosynthetic electro...
Graphene Quantum Dot‐Doped PEDOT for Simultaneous Determination of Ascorbic Acid, Dopamine, and Uric Acid
Graphene Quantum Dot‐Doped PEDOT for Simultaneous Determination of Ascorbic Acid, Dopamine, and Uric Acid
AbstractWe propose a novel strategy to prepare poly(3,4‐ethylenedioxythiophene) (PEDOT) thin films (PEDOT‐GQD) doped with graphene quantum dots (GQD) as an electrode active materia...
Invited Presentation: Cytocompatibility of Macroporous All-Carbon Scaffolds for Biomedical Applications
Invited Presentation: Cytocompatibility of Macroporous All-Carbon Scaffolds for Biomedical Applications
Introduction:
The assembly of carbon nanomaterials (carbon nanotubes, fullerenes, or graphene) into three-dimensional (3-D) structures is necessary t...
PEDOT hautement conducteurs : synthèse, stabilité, propriétés mécaniques et dispositifs électrothermiques transparents
PEDOT hautement conducteurs : synthèse, stabilité, propriétés mécaniques et dispositifs électrothermiques transparents
Les polymères conducteurs présentent des propriétés de conduction électrique, une flexibilité et une facilité de mise en œuvre qui ont permis leur intégration dans de nombreux disp...

