Javascript must be enabled to continue!
Preparation and characterization of hydrogels based on glycidyl methacrylate (GMA)‐grafted NR and modified cassava starch as eco‐friendly materials for sustainable agriculture
View through CrossRef
AbstractEco‐friendly hydrogel was developed using natural rubber latex (NR) and cassava starch (CSt) through grafting modifications to enhance their swelling and water retention by selecting suitable grafting components and improving compatibility. To improve its hydrophilicity and compatibility with CSt, NR was grafted with glycidyl methacrylate (NR‐g‐GMA, NRG). Subsequently, CSt was grafted with acrylic acid (AA) and acrylamide (AM), crosslinked with N,N′‐methylene‐bis‐acrylamide (MBA), and ultimately interpenetrated by NRG to produce CSt‐g‐PAA/NRG and CSt‐g‐PAM/NRG hydrogels, respectively. The obtained hydrogels were characterized by various techniques. Results revealed that CSt‐g‐PAM/NRG exhibited exceptional equilibrium water swelling (Seq) at 2413%, surpassing CSt‐g‐PAA/NRG (416%), and CSt/NR (146%). This was attributed to the synergistic effects of the improved NR polarity and compatibility, the looser structures, the higher rate constant of water swelling (20.06%/s), and the greater compatibility between compositions compared to the CSt‐g‐PAA/NRG system. Therefore, AM was the suitable grafting monomer for the CSt/NRG hydrogel system. Also, the CSt‐g‐PAM/NRG hydrogel exhibited remarkable water retention for up to 30 days with excellent biodegradation (55%) and good biosafety. This study demonstrates a promising strategy for improving swelling capacity (~1600%) and water retention (58%) of biodegradable CSt/NR hydrogels as a low‐cost coating membrane for sustainable agriculture.Highlights
Boost of NR hydrophilicity and compatibility via GMA grafting to generate NRG.
Fabrication of CSt‐g‐PAA/NRG and CSt‐g‐PAM/NRG hydrogels by semi‐IPN technique.
CSt‐g‐PAM/NRG swelling showed a significant improvement over CSt‐g‐PAA/NRG.
AM was the suitable grafting monomer for the CSt/NRG hydrogel system.
CSt‐g‐PAM/NRG showed good biodegradability and water retention for agriculture.
Title: Preparation and characterization of hydrogels based on glycidyl methacrylate (GMA)‐grafted NR and modified cassava starch as eco‐friendly materials for sustainable agriculture
Description:
AbstractEco‐friendly hydrogel was developed using natural rubber latex (NR) and cassava starch (CSt) through grafting modifications to enhance their swelling and water retention by selecting suitable grafting components and improving compatibility.
To improve its hydrophilicity and compatibility with CSt, NR was grafted with glycidyl methacrylate (NR‐g‐GMA, NRG).
Subsequently, CSt was grafted with acrylic acid (AA) and acrylamide (AM), crosslinked with N,N′‐methylene‐bis‐acrylamide (MBA), and ultimately interpenetrated by NRG to produce CSt‐g‐PAA/NRG and CSt‐g‐PAM/NRG hydrogels, respectively.
The obtained hydrogels were characterized by various techniques.
Results revealed that CSt‐g‐PAM/NRG exhibited exceptional equilibrium water swelling (Seq) at 2413%, surpassing CSt‐g‐PAA/NRG (416%), and CSt/NR (146%).
This was attributed to the synergistic effects of the improved NR polarity and compatibility, the looser structures, the higher rate constant of water swelling (20.
06%/s), and the greater compatibility between compositions compared to the CSt‐g‐PAA/NRG system.
Therefore, AM was the suitable grafting monomer for the CSt/NRG hydrogel system.
Also, the CSt‐g‐PAM/NRG hydrogel exhibited remarkable water retention for up to 30 days with excellent biodegradation (55%) and good biosafety.
This study demonstrates a promising strategy for improving swelling capacity (~1600%) and water retention (58%) of biodegradable CSt/NR hydrogels as a low‐cost coating membrane for sustainable agriculture.
Highlights
Boost of NR hydrophilicity and compatibility via GMA grafting to generate NRG.
Fabrication of CSt‐g‐PAA/NRG and CSt‐g‐PAM/NRG hydrogels by semi‐IPN technique.
CSt‐g‐PAM/NRG swelling showed a significant improvement over CSt‐g‐PAA/NRG.
AM was the suitable grafting monomer for the CSt/NRG hydrogel system.
CSt‐g‐PAM/NRG showed good biodegradability and water retention for agriculture.
Related Results
Reactive Compatibilization of PA6/LDPE Blends with Glycidyl Methacrylate Functionalized Polyolefins
Reactive Compatibilization of PA6/LDPE Blends with Glycidyl Methacrylate Functionalized Polyolefins
AbstractSummary: Blends of polyamide‐6 (PA6) and low density polyethylene (LDPE) were compatibilized by melt mixing with various polyolefins functionalized with glycidyl methacryla...
Characterization and application of bambara groundnut starch-lipid complexes
Characterization and application of bambara groundnut starch-lipid complexes
Bambara groundnut (Vigna subterranea) is an indigenous underutilised leguminous crop to Africa. It is a good source of protein and carbohydrate including starch. Bambara groundnut ...
Effect of Glycidyl Methacrylate (GMA) Content on Grafting Yield and Mechanical Properties of GMA Grafted Poly(Lactic Acid) Prepared by Melt Mixing Method
Effect of Glycidyl Methacrylate (GMA) Content on Grafting Yield and Mechanical Properties of GMA Grafted Poly(Lactic Acid) Prepared by Melt Mixing Method
Glycidyl methacrylate (GMA) was grafted onto poly (lactic acid) (PLA) by internal mixer using dicumyl peroxide (DCP) as an initiator. The results from proton nuclear magnetic reson...
Tuning the Chemical and Thermo-Mechanical Properties of Cassava Starch Thin Films to Produce Biodegradable Packaging Materials
Tuning the Chemical and Thermo-Mechanical Properties of Cassava Starch Thin Films to Produce Biodegradable Packaging Materials
Abstract
Starch is a renewable resource and starch films play a vital role as an alternative for synthetic polymers in packaging applications. However, the films prepared f...
Poly(methyl methacrylate) and glycidyl-functionalized poly(methyl methacrylate) nano-size latex particles via differential microemulsion polymerization
Poly(methyl methacrylate) and glycidyl-functionalized poly(methyl methacrylate) nano-size latex particles via differential microemulsion polymerization
The differential microemulsion polymerization technique was used to synthesize nanoparticles of glycidyl-functionalized poly(methyl methacrylate), PMMA, via a two-step process, by ...
Biocomposites of Poly(Lactic Acid) and Cellulose Nanofibers from Cassava Pulp
Biocomposites of Poly(Lactic Acid) and Cellulose Nanofibers from Cassava Pulp
Cellulose nanofibers (CNFs) were used as biobased fillers to prepare poly(lactic acid) (PLA)-based biocomposites. Cellulose nanofibers were extracted from cassava pulp (CP) by acid...
Modification of Cellulose Isolated from Coconut Dregs Using Glycidyl Methacrylate (GMA)
Modification of Cellulose Isolated from Coconut Dregs Using Glycidyl Methacrylate (GMA)
The main objective of this work was to produce grafted cellulose from coconut dregs. In this work, cellulose isolated from coconut dregs was grafted with various concentrations of ...
Hemocompatible gelatin-glycidyl methacrylate/graphene oxide composite hydrogels for vascular catheter applications
Hemocompatible gelatin-glycidyl methacrylate/graphene oxide composite hydrogels for vascular catheter applications
Abstract
The development of biocompatible and hemocompatible materials is crucial for various biomedical applications. In this study, gelatin (Gel) was modified using gly...

