Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

MBE Growth and Characterization of Graphene on Well-Defined Cobalt Oxide Surfaces: Graphene Spintronics without Spin Injection

View through CrossRef
The direct growth of graphene by scalable methods on magnetic insulators is important for industrial development of graphene-based spintronic devices, and a route towards substrate-induced spin polarization in graphene without spin injection. X-ray photoelectron spectroscopy (XPS), low energy electron diffraction LEED, electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES) demonstrate the growth of Co3O4(111) and CoO(111) to thicknesses greater than 100 Å on Ru(0001) surfaces, by molecular beam epitaxy (MBE). The results obtained show that the formation of the different cobalt oxide phases is O2 partial pressure dependent under same temperature and vacuum conditions and that the films are stoichiometric. Electrical I-V measurement of the Co3O4(111) show characteristic hysteresis indicative of resistive switching and thus suitable for advanced device applications. In addition, the growth of Co0.5Fe0.5O(111) was also achieved by MBE and these films were observed to be OH-stabilized. C MBE yielded azimuthally oriented few layer graphene on the OH-terminated CoO(111), Co0.5Fe0.5O(111) and Co3O4(111). AES confirms the growth of (111)-ordered sp2 C layers. EELS data demonstrate significant graphene-to-oxide charge transfer with Raman spectroscopy showing the formation of a graphene-oxide buffer layer, in excellent agreement with previous theoretical predictions. XPS data show the formation of C-O covalent bonding between the oxide layer and the first monolayer (ML) of C. LEED data reveal that the graphene overlayers on all substrates exhibit C3V. The reduction of graphene symmetry to C3V – correlated with C-O bond formation – enables spin-orbit coupling in graphene. Consequences may include a significant band gap and room temperature spin Hall effect – important for spintronic device applications. The results suggest a general pattern of graphene/graphene oxide growth and symmetry lowering for graphene formation on the (111) surfaces of rocksalt-structured oxides.
University of North Texas Libraries
Title: MBE Growth and Characterization of Graphene on Well-Defined Cobalt Oxide Surfaces: Graphene Spintronics without Spin Injection
Description:
The direct growth of graphene by scalable methods on magnetic insulators is important for industrial development of graphene-based spintronic devices, and a route towards substrate-induced spin polarization in graphene without spin injection.
X-ray photoelectron spectroscopy (XPS), low energy electron diffraction LEED, electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES) demonstrate the growth of Co3O4(111) and CoO(111) to thicknesses greater than 100 Å on Ru(0001) surfaces, by molecular beam epitaxy (MBE).
The results obtained show that the formation of the different cobalt oxide phases is O2 partial pressure dependent under same temperature and vacuum conditions and that the films are stoichiometric.
Electrical I-V measurement of the Co3O4(111) show characteristic hysteresis indicative of resistive switching and thus suitable for advanced device applications.
In addition, the growth of Co0.
5Fe0.
5O(111) was also achieved by MBE and these films were observed to be OH-stabilized.
C MBE yielded azimuthally oriented few layer graphene on the OH-terminated CoO(111), Co0.
5Fe0.
5O(111) and Co3O4(111).
AES confirms the growth of (111)-ordered sp2 C layers.
EELS data demonstrate significant graphene-to-oxide charge transfer with Raman spectroscopy showing the formation of a graphene-oxide buffer layer, in excellent agreement with previous theoretical predictions.
XPS data show the formation of C-O covalent bonding between the oxide layer and the first monolayer (ML) of C.
LEED data reveal that the graphene overlayers on all substrates exhibit C3V.
The reduction of graphene symmetry to C3V – correlated with C-O bond formation – enables spin-orbit coupling in graphene.
Consequences may include a significant band gap and room temperature spin Hall effect – important for spintronic device applications.
The results suggest a general pattern of graphene/graphene oxide growth and symmetry lowering for graphene formation on the (111) surfaces of rocksalt-structured oxides.

Related Results

Dynamics of spinor fermions
Dynamics of spinor fermions
Ultracold atomic gases have established themselves as quantum systems, which are clean and offer a high degree of control over crucial parameters. They are well isolated from their...
Tailoring spin dynamics in asymmetric FM1/Pt/FM2 trilayers via Pt spacer thickness
Tailoring spin dynamics in asymmetric FM1/Pt/FM2 trilayers via Pt spacer thickness
The study of trilayers with a non-magnetic (NM) spacer layer separating two ferromagnetic layers (FM/NM/FM) has been an active area of spintronics research due to their real-world ...
Spin to charge current interconversion in Rasha interfaces and topological insulators
Spin to charge current interconversion in Rasha interfaces and topological insulators
Conversion entre courant de spin et courant de charge dans des interfaces Rashba et des isolants topologiques L'interconversion entre courants de spin et de charge ...
Preparation of Graphene Fibers
Preparation of Graphene Fibers
Graphene owns intriguing properties in electronic, thermal, and mechanic with unique two-dimension (2D) monolayer structure. The new member of carbon family has not only attracted ...
The influence of the oxidation method on the properties of reduced graphene oxide
The influence of the oxidation method on the properties of reduced graphene oxide
Derivatives of graphene have become important materials due to their excellent properties. Graphene oxide and reduced graphene oxide are especially interesting because they are pro...
Electronic and magnetic properties of two dimensional crystals
Electronic and magnetic properties of two dimensional crystals
<p>In the last few years, two dimensional crystals have become available for experimental studies. Good examples of such systems are monolayers and bilayers of graphene and m...
The structure of thermally reduced graphene oxide
The structure of thermally reduced graphene oxide
The paper focused on the description of the reduced graphene oxide (rGO) structure. This material is obtained from a multistage production process. Each of these stages has a large...
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Graphene has been thought to be an ideal reinforcement material for metal matrix composite due to its superior mechanical properties and unique two-dimensional geometry. However, t...

Back to Top