Javascript must be enabled to continue!
Investigating the Influence of Exchange-correlation Effects and the Hubbard Term on the Electronic Bands of Defected Cu2o: a Dft Study
View through CrossRef
Abstract
This study investigates the structural and electronic properties of defected Cu2O using density functional theory (DFT) within the Quantum Espresso package, incorporating plane wave and pseudopotential methods. The analysis includes three exchange-correlation functionals: Perdew-Burke-Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), and local density approximation (LDA), with and without the Hubbard term (U=8.5 eV for Cu and O). The study reveals that PBE and PBEsol underestimate the experimental lattice constant 'b' while PZ-LDA provides values closer to the experimental data. The lattice parameters for PBEsol (b = 7.6940 Å) and PZ-LDA (b = 7.7006 Å) were observed to deviate from the initial lattice parameter (b = 8.5040 Å). Bond distances, such as Cu-O and O-O, are overestimated across all functionals, with PBE yielding the highest values (Cu-O = 1.9082 Å, O-O = 3.8027 Å) compared to PZ-LDA (Cu-O = 1.9077 Å, O-O = 3.8018 Å) and PBEsol (Cu-O = 1.8652 Å, O-O = 3.7406 Å). The Cu-Cu bond distance showed a modulated pattern with LDA underestimating these values (Cu-Cu = 3.1776 Å). Bond angles in the structure also varied, with angles such as Cu5∠O11∠Cu6, Cu5∠O11∠Cu7, and Cu6∠O11∠Cu7 showing significant deviations across functionals. The inter-atomic distances at the vacant site also exhibited noticeable changes post-relaxation, particularly with PBEsol and LDA, where the distances between Cu atoms such as Cu11 to Cu21 (2.4855 Å), Cu06 to Cu16 (2.4855 Å), and Cu06 to Cu11 (2.6653 Å) differed from the initial values (3.006 Å). The inclusion of the Hubbard term notably impacted the band structure, improving the band gap values for all functionals. The Fermi energy (eV) for PBE (1.97 eV), PBEsol (1.05 eV), and LDA (1.27 eV) showed varied deviations. The study highlights the Jahn-Teller distortion effect, particularly at the Cu-Cu bond length at the oxygen vacant site, and underscores the importance of Cu 3dxz, 3dyz, and O 2s orbital hybridization in forming the defected Cu2O band gap. The research therefore, underscores the necessity of accounting for exchange-correlation effects and the Hubbard term in accurately modeling defected Cu2O, contributing to a deeper understanding of its electronic properties and guiding future doping investigations.
Springer Science and Business Media LLC
Title: Investigating the Influence of Exchange-correlation Effects and the Hubbard Term on the Electronic Bands of Defected Cu2o: a Dft Study
Description:
Abstract
This study investigates the structural and electronic properties of defected Cu2O using density functional theory (DFT) within the Quantum Espresso package, incorporating plane wave and pseudopotential methods.
The analysis includes three exchange-correlation functionals: Perdew-Burke-Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), and local density approximation (LDA), with and without the Hubbard term (U=8.
5 eV for Cu and O).
The study reveals that PBE and PBEsol underestimate the experimental lattice constant 'b' while PZ-LDA provides values closer to the experimental data.
The lattice parameters for PBEsol (b = 7.
6940 Å) and PZ-LDA (b = 7.
7006 Å) were observed to deviate from the initial lattice parameter (b = 8.
5040 Å).
Bond distances, such as Cu-O and O-O, are overestimated across all functionals, with PBE yielding the highest values (Cu-O = 1.
9082 Å, O-O = 3.
8027 Å) compared to PZ-LDA (Cu-O = 1.
9077 Å, O-O = 3.
8018 Å) and PBEsol (Cu-O = 1.
8652 Å, O-O = 3.
7406 Å).
The Cu-Cu bond distance showed a modulated pattern with LDA underestimating these values (Cu-Cu = 3.
1776 Å).
Bond angles in the structure also varied, with angles such as Cu5∠O11∠Cu6, Cu5∠O11∠Cu7, and Cu6∠O11∠Cu7 showing significant deviations across functionals.
The inter-atomic distances at the vacant site also exhibited noticeable changes post-relaxation, particularly with PBEsol and LDA, where the distances between Cu atoms such as Cu11 to Cu21 (2.
4855 Å), Cu06 to Cu16 (2.
4855 Å), and Cu06 to Cu11 (2.
6653 Å) differed from the initial values (3.
006 Å).
The inclusion of the Hubbard term notably impacted the band structure, improving the band gap values for all functionals.
The Fermi energy (eV) for PBE (1.
97 eV), PBEsol (1.
05 eV), and LDA (1.
27 eV) showed varied deviations.
The study highlights the Jahn-Teller distortion effect, particularly at the Cu-Cu bond length at the oxygen vacant site, and underscores the importance of Cu 3dxz, 3dyz, and O 2s orbital hybridization in forming the defected Cu2O band gap.
The research therefore, underscores the necessity of accounting for exchange-correlation effects and the Hubbard term in accurately modeling defected Cu2O, contributing to a deeper understanding of its electronic properties and guiding future doping investigations.
Related Results
Progress of Cu2O/ZnO oxide heterojunction solar cells
Progress of Cu2O/ZnO oxide heterojunction solar cells
Recent progress of low cost Cu2O/ZnO hetero-junction solar cells is reviewed in this paper. The Cu2O used as an absorbing layer in photovoltaic cells is a direct bandgap semiconduc...
Comparative photocatalytic study of visible light driven BiVO4, Cu2O, and Cu2O/BiVO4 nanocomposite for degradation of antibiotic for wastewater treatment
Comparative photocatalytic study of visible light driven BiVO4, Cu2O, and Cu2O/BiVO4 nanocomposite for degradation of antibiotic for wastewater treatment
Semiconductor-based photocatalysts have become increasingly used in the removal of pollutants from wastewater, especially antibiotics. A series of composite-based cuprous oxide and...
(Invited) Development of High-Efficiency Transparent Cu2O Top Cells for Tandem Photovoltaics with Efficiency Exceeding 30%
(Invited) Development of High-Efficiency Transparent Cu2O Top Cells for Tandem Photovoltaics with Efficiency Exceeding 30%
Solar cells with high power generation efficiency are expected to be used in mobility applications that require high power output in a limited footprint, such as electric vehicles ...
Effect of Co‐Surfactants on Properties and Bactericidal Activity of Cu2O and Hybrid Cu2O/Ag Particles
Effect of Co‐Surfactants on Properties and Bactericidal Activity of Cu2O and Hybrid Cu2O/Ag Particles
AbstractNanomaterials based on metal oxides, especially Cu2O, have received much attention in recent years due to the many unique properties of the surface plasmon resonance they p...
Influence of annealing temperature on properties of Cu2O thin films deposited by electron beam evaporation
Influence of annealing temperature on properties of Cu2O thin films deposited by electron beam evaporation
Inorganic-organic metal halide perovskite solar cells (PSCs) have drawn tremendous attention as a promising next-generation solar-cell technology because of their high efficiencies...
Synthesis of Cu<sub>2</sub>O and Cu<sub>2</sub>O-C<sub>3</sub>N<sub>4</sub> nanomaterials for the photodegradation of organic dyes under visible light irradiation
Synthesis of Cu<sub>2</sub>O and Cu<sub>2</sub>O-C<sub>3</sub>N<sub>4</sub> nanomaterials for the photodegradation of organic dyes under visible light irradiation
These experiment fabricated C3N4 powdermaterials by the calcinational method and fabricated Cu2O, Cu2O-3%C3N4, Cu2O-5%C3N4 nanomaterials by the hydrothermal method. The powdermater...
A Novel Cu2O/ZnO@PET Composite Membrane for the Photocatalytic Degradation of Carbendazim
A Novel Cu2O/ZnO@PET Composite Membrane for the Photocatalytic Degradation of Carbendazim
The extremely high levels of water pollution caused by various industrial activities represent one of the most important environmental problems. Efficient techniques and advanced m...
Decorating Cu2O with Copper Metal (Cu) through Facile Electrochemical Deposition for Methylene Blue Degradation
Decorating Cu2O with Copper Metal (Cu) through Facile Electrochemical Deposition for Methylene Blue Degradation
Cuprous oxide (Cu2O) thin film was decorated with copper metal (Cu) by the simple electrochemical deposition method. This study was motivated to improve the role of Cu as a co-cata...

