Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

ICRF resonance cones in the low-density scrape-off-layer of ASDEX Upgrade

View through CrossRef
Abstract The ICRF slow wave is a potential carrier for parallel RF electric fields known to cause unwanted plasma-wall interactions in magnetic confinement fusion experiments. In nowadays machines the slow wave is usually confined to the far scrape-off layer or the limiter shadow, but conditions in future experiments and reactors may allow the slow wave to be propagative in a larger region. Simulations with RAPLICASOL for various geometries show that the ICRF slow waves appear as the so-called resonance cones (RCs) characterized by large localized electric fields. The RCs emerge from the points along the plasma-antenna interface where (in the cold plasma approximation) the radio frequency electric field diverges. We demonstrate that in the parameter range of interest, the propagation of the RCs in a plasma with a density gradient is defined by a simple geometric model, using the local plasma density and the frequency as input parameters. In the context of experiments at ASDEX Upgrade, simulations illustrate that the RCs can emerge from a single tile of the ICRF antenna limiter. Experiments at the Ion-cyclotron System Hardware Test ARrangement (ISHTAR) were conducted to test the detection principle in a simple environment. In agreement with simulations and with predicted characteristics which depend on operation parameters, the RCs are excited by an RF antenna and propagate through the relatively homogeneous plasma in ISHTAR. The cones are detected at a distance from the antenna using two probes scanning through the plasma. In ASDEX Upgrade, a single tile of an antenna limiter was modified to launch RF power into a specially tailored low-density scrape-off layer. Probes at the mid-plane manipulator were then used to detect the wave electric fields at a distance from the RF source. The detected RF signals show that the signal maxima are located close to the lower hybrid resonance density and are highest when the source and the probes are connected along magnetic field lines. These observations agrees with the model for RCs from the simulations.
Title: ICRF resonance cones in the low-density scrape-off-layer of ASDEX Upgrade
Description:
Abstract The ICRF slow wave is a potential carrier for parallel RF electric fields known to cause unwanted plasma-wall interactions in magnetic confinement fusion experiments.
In nowadays machines the slow wave is usually confined to the far scrape-off layer or the limiter shadow, but conditions in future experiments and reactors may allow the slow wave to be propagative in a larger region.
Simulations with RAPLICASOL for various geometries show that the ICRF slow waves appear as the so-called resonance cones (RCs) characterized by large localized electric fields.
The RCs emerge from the points along the plasma-antenna interface where (in the cold plasma approximation) the radio frequency electric field diverges.
We demonstrate that in the parameter range of interest, the propagation of the RCs in a plasma with a density gradient is defined by a simple geometric model, using the local plasma density and the frequency as input parameters.
In the context of experiments at ASDEX Upgrade, simulations illustrate that the RCs can emerge from a single tile of the ICRF antenna limiter.
Experiments at the Ion-cyclotron System Hardware Test ARrangement (ISHTAR) were conducted to test the detection principle in a simple environment.
In agreement with simulations and with predicted characteristics which depend on operation parameters, the RCs are excited by an RF antenna and propagate through the relatively homogeneous plasma in ISHTAR.
The cones are detected at a distance from the antenna using two probes scanning through the plasma.
In ASDEX Upgrade, a single tile of an antenna limiter was modified to launch RF power into a specially tailored low-density scrape-off layer.
Probes at the mid-plane manipulator were then used to detect the wave electric fields at a distance from the RF source.
The detected RF signals show that the signal maxima are located close to the lower hybrid resonance density and are highest when the source and the probes are connected along magnetic field lines.
These observations agrees with the model for RCs from the simulations.

Related Results

ICRF wave field measurements in the presence of scrape off layer turbulence on the ASDEX Upgrade tokamak (invited)
ICRF wave field measurements in the presence of scrape off layer turbulence on the ASDEX Upgrade tokamak (invited)
A new array of B-dot probes was installed on ASDEX Upgrade. The purpose of the new diagnostic is to study Ion Cyclotron Range-off Frequencies (ICRF) wave field distributions in the...
Further upgrades of the ASDEX Upgrade ICRF system
Further upgrades of the ASDEX Upgrade ICRF system
The original plans were to operate the tokamak ASDEX Upgrade (AUG) for ten years. The flexibility of the experiment lead to the fact, that AUG is now operating for over three decad...
ICRF coupling in ASDEX upgrade magnetically perturbed 3D plasmas
ICRF coupling in ASDEX upgrade magnetically perturbed 3D plasmas
Abstract The RF properties of the four ion cyclotron range of frequencies (ICRF) antennas in the ASDEX Upgrade tokamak are characterized in H-mode magnetically pertu...
The Upgrade and Performance of the Discoverer 534 Dynamic Positioning System
The Upgrade and Performance of the Discoverer 534 Dynamic Positioning System
ABSTRACT The Discoverer 534 was upgraded in 1990 from a turret moored/Dynamically Positioned (OP) drillship capable of operating in 3,500 ft. of water, to a DP dr...
First results with 3-strap ICRF antennas in ASDEX Upgrade
First results with 3-strap ICRF antennas in ASDEX Upgrade
Abstract The 3-strap antennas in ASDEX Upgrade allow ICRF operation with low tungsten (W) content in the confined plasma with W-coated antenna limiters. With the 3-s...

Back to Top