Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Statistical assessment of ELM triggering by pellets on JET

View through CrossRef
Abstract This article investigates the triggering of ELMs on JET by injection of frozen pellets of isotopes of Hydrogen. A method is established to determine the probability that a specific pellet triggers a particular ELM. This method allows clear distinction between pellet-ELM pairs that are very likely to represent triggering events and pairs that are very unlikely to represent such an event. Based on this, the pellet parameters that are most likely to affect the ability of pellets to trigger ELMs have been investigated. It has been found that the injection location is very important, with injection from the vertical high field side showing a much higher triggering efficiency than low field side (LFS) injection. The dependence on parameters such as pellet speed and size and the time since the last ELM is also seen to be much stronger for LFS injection. Finally, the paper illustrates how improvements to the pellet injection system by streamlining the pellet flight lines and slightly increasing the pellet size has resulted in a significantly improved ability to deliver pellets to the plasma and trigger ELMs.
Title: Statistical assessment of ELM triggering by pellets on JET
Description:
Abstract This article investigates the triggering of ELMs on JET by injection of frozen pellets of isotopes of Hydrogen.
A method is established to determine the probability that a specific pellet triggers a particular ELM.
This method allows clear distinction between pellet-ELM pairs that are very likely to represent triggering events and pairs that are very unlikely to represent such an event.
Based on this, the pellet parameters that are most likely to affect the ability of pellets to trigger ELMs have been investigated.
It has been found that the injection location is very important, with injection from the vertical high field side showing a much higher triggering efficiency than low field side (LFS) injection.
The dependence on parameters such as pellet speed and size and the time since the last ELM is also seen to be much stronger for LFS injection.
Finally, the paper illustrates how improvements to the pellet injection system by streamlining the pellet flight lines and slightly increasing the pellet size has resulted in a significantly improved ability to deliver pellets to the plasma and trigger ELMs.

Related Results

COMPARATIVE ESTIMATION OF THE QUALITY OF UKRAINIAN AND EUROPEAN HOP PELLETS
COMPARATIVE ESTIMATION OF THE QUALITY OF UKRAINIAN AND EUROPEAN HOP PELLETS
. In Ukraine, hops are basically processed into Type 90 pellets, that are practically indistinguishable in terms of biochemical indicators from hop cones. Pellets of hop are the si...
Determination of Length of Individual Pellets and Pellets’ Lengths Distribution
Determination of Length of Individual Pellets and Pellets’ Lengths Distribution
A form and dimensions of fuel particles influence the intensity of their burning and approaches to the mathematic description of the process. Known methods do not allow correctly m...
Release characteristics of drug having different solubilities from matrix pellets containing glycerides
Release characteristics of drug having different solubilities from matrix pellets containing glycerides
The release properties of having different solubilities (propranolol hydrochloride and diclofenac sodium) from the glycerides matrix pellets were investigated. The pellets were pre...
Cavitation in Submerged Water Jet at High Jet Pressure
Cavitation in Submerged Water Jet at High Jet Pressure
Recent industrial applications have unfolded a promising prospect for submerged water jet. Apart from widely acknowledged water jet properties, submerged water jet is characterized...
Study on the image recognition of ammonia ignition process induced by methanol micro-jet
Study on the image recognition of ammonia ignition process induced by methanol micro-jet
<div class="section abstract"><div class="htmlview paragraph">Ammonia is regarded as a possible carbon-free energy source for engines, drawing more and more attention. ...
Passive control of coaxial jet with supersonic primary jet and sonic secondary jet
Passive control of coaxial jet with supersonic primary jet and sonic secondary jet
The mixing enhancement of a coaxial jet with a Mach 1.4 primary jet and sonic secondary jet, at different convective Mach numbers, is presented in this study. Rectangular tabs of a...
Carbon burnout from the char of a single cylindrical pellet
Carbon burnout from the char of a single cylindrical pellet
In countries with limited wood fuel resources, the use of straw for energy should be increased to comply with environmental commitments. Boiler houses burning whole straw bales hav...
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Driven by the motive of minimizing the transportation costs of raw materials to manufacture wood–plastic composites (WPCs), Part I and the current Part II of this paper series expl...

Back to Top