2D analysis of sputtered species transport in high-power impulse magnetron sputtering (HiPIMS) discharge

Among the numerous advantages of the high-power impulse magnetron sputtering (HiPIMS) technique, the most important is the enhanced ionization degree of sputtered species contributing to the film growth. Consequently, the quality of deposited thin films is highly improved. Still, the optimization process is challenging due to the complexity associated with the intricate transport of the sputtered species, ionized or neutrals. The scarce knowledge available on the spatial distribution of these species when operating a HiPIMS discharge makes the quantitative prediction of any deposition feature particularly difficult. In this paper, we discuss the influence of experimentally controllable quantities, such as gas pressure and target current density, on the transport of sputtered titanium in non-reactive (argon) HiPIMS, namely, on the behavior of metal atoms and metal ion fluxes intercepting the substrate. Systematic quantitative measurements were performed in a diameter normal plane on a circular planar target. Hence, the 2D spatial distribution of the ionized flux fraction (IFF) and the total flux of titanium sputtered particles (deposition rate) are evaluated by biasing a quartz crystal microbalance equipped with an electron magnetic filter. The wide range of parameters we examined allows us to predict and optimize the flux of sputtered species based on complete mapping of the IFF of sputtered particles.