Javascript must be enabled to continue!
Rapid Drawdown in Homogeneous Earth Dam Considering Transient Flow and Suction
View through CrossRef
The present work intends to demonstrate the advantages of considering transient flow regime in the stability analysis of the upstream slope for the rapid drawdown situation of a homogeneous earth dam. Upstream slope stability evaluations were carried out, considering pore pressure and suction from transient flow analysis while simulating rapid drawdown of the reservoir. The evaluations comprised different geometries of the upstream slope (from 1V:1.1H to 1V:2.5H) and heights varying from 10 m to 50 m, as well as several low permeability materials (SM, SM-SC, SC, ML, ML-CL, CL, MH and CH). In addition, equations relating the safety factor to such slopes or dam height were adjusted to the analysis data, in order to define the minimum slope for a certain dam height or the maximum height for a given upstream slope. The results have shown that, considering the transient flow condition, including suction, within the slope stability analysis of the rapid drawdown situation, increases the safety factor in relation to the simplified analysis that is usually adopted. This also results in much steeper slopes (for a safety factor of 1.1) than the ones recommended by the U.S. Bureau of Reclamation (USBR), suggesting the importance of performing transient flow analysis for rapid drawdown situations and considering its results instability analysis.
Title: Rapid Drawdown in Homogeneous Earth Dam Considering Transient Flow and Suction
Description:
The present work intends to demonstrate the advantages of considering transient flow regime in the stability analysis of the upstream slope for the rapid drawdown situation of a homogeneous earth dam.
Upstream slope stability evaluations were carried out, considering pore pressure and suction from transient flow analysis while simulating rapid drawdown of the reservoir.
The evaluations comprised different geometries of the upstream slope (from 1V:1.
1H to 1V:2.
5H) and heights varying from 10 m to 50 m, as well as several low permeability materials (SM, SM-SC, SC, ML, ML-CL, CL, MH and CH).
In addition, equations relating the safety factor to such slopes or dam height were adjusted to the analysis data, in order to define the minimum slope for a certain dam height or the maximum height for a given upstream slope.
The results have shown that, considering the transient flow condition, including suction, within the slope stability analysis of the rapid drawdown situation, increases the safety factor in relation to the simplified analysis that is usually adopted.
This also results in much steeper slopes (for a safety factor of 1.
1) than the ones recommended by the U.
S.
Bureau of Reclamation (USBR), suggesting the importance of performing transient flow analysis for rapid drawdown situations and considering its results instability analysis.
Related Results
Theia can arrive late and be oxidized, but not if it is large compared to proto-Earth
Theia can arrive late and be oxidized, but not if it is large compared to proto-Earth
The Moon-forming impact was the most significant event during the accretion of Earth substantially establishing the physical and chemical states of the Earth-Moon system. In the ca...
The Effects of Periodic Suction on Separated Flow in Diffuser
The Effects of Periodic Suction on Separated Flow in Diffuser
The effects of periodic suction on the separated flow are still unclear and the relevant researches are still scarce, thus this paper presents a periodic suction method to suppress...
Analisis Pengaruh Ketinggian Isap terhadap Performa Hidraulik Pompa Shimizu PS-130 BIT
Analisis Pengaruh Ketinggian Isap terhadap Performa Hidraulik Pompa Shimizu PS-130 BIT
Water pumps are widely used to meet household clean water demands. One of the factors affecting pump performance is suction height, as it influences flow capacity, head, efficiency...
Study on Deformation Characteristics of Gate Dam and Earth-Rock Dam System on Deep Overburden
Study on Deformation Characteristics of Gate Dam and Earth-Rock Dam System on Deep Overburden
The gate dam and earth-rock dam system offers advantages such as minimal ecological impact and strong terrain adaptability, making them the preferred dam type for low-head, high-fl...
Study on Deformation Characteristics of Gate Dam and Earth–Rock Dam Systems with Deep Overburden
Study on Deformation Characteristics of Gate Dam and Earth–Rock Dam Systems with Deep Overburden
Gate dam and earth–rock dam systems have many advantages, such as minimal ecological impact and good terrain adaptability, making them the preferred dam type for low-head, high-flo...
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Abstract
Flow instability is a common unsteady phenomenon in the field of turbomachinery that often causes large pressure fluctuations, performance penalties, and st...
Suction Pile Allowable Suction Pressure Envelopes Based on Soil Failure and Structural Buckling
Suction Pile Allowable Suction Pressure Envelopes Based on Soil Failure and Structural Buckling
Abstract
This study develops the allowable suction pressure envelopes using applicable industrial codes for different suction pile sizes at various penetration depth...
Pressure Analysis of DST Flow Period Or Slug Flow For Horizontal Wells In Homogeneous Reservoir
Pressure Analysis of DST Flow Period Or Slug Flow For Horizontal Wells In Homogeneous Reservoir
Abstract
By the transient pressure for horizontal well with constant flow rate and Duhamel's principle, this paper presents the method to calculate the transient ...

